DESCRIPTION

PCT ELASTOGUARD is a high build; high solids crack bridging smooth waterproofing to be used with

membrane for interior and exterior use.

FEATURES

High solid close film formation resin Flexible

Excellent UV stability

Available in eight popular colours Will not flake, peel or blister

Contains PCT WATER REPELLENT TECHNOLOGY Contains a rust inhibitor for steel

Ideally suitable as replacement for “torch-on” on concrete roof slabs.

BENEFITS

Economical Durable

Ready to use
Quick drying

Surface tolerant

Contains no toxic solvents UV stable

Impermeable to water or moisture Excellent mechanical properties Ease of application

May be spray applied

TYPICAL SUBSTRATES

Parapets

Concrete surfaces Plaster surfaces Roof flashings

Galvanised roofs Cement roof tiles Tile ridging

Gutters and downpipes

Substitute for “torch-on”

                PRODUCT INFORMATION

                COLOUR                  Available in eight colours SOLID CONTENT  76%

               SG                            1.38-1.42

               SOLVENT                 Water based

               SPR                          0.5 m² per litre depending on surface porosity

               WFT                         1.5-2 millimetre
               WATER INGRESS WACKER TEST METHOD

                      Zero after72 hours

                TEMPERATURE     Maximum 38°C
                                                 Minimum 10°C

                 DRYING TIME        Touch dry after 4 hours @25°C and
                 OVERCOATING     24 hours

                 FULL CURE             7 days

                SHELF LIFE             12 months

                POT LIFE                  6 hours after removal of lid

                MIXING                     Stir frequently

                SURFACE                 Dry

                CLEANING                Potable water

                PACKAGING             1, 5 and 20 litre triple lock packs.

                APPLICATION

STEEL and GALVANISED SURFACES

Sand down with abrasive sandpaper and ensure that the surface is free from any rust, oxidisation. dust, dirt or any foreign debris.

Apply one coat of PCT ELASTOGUARD followed by the
application of the membrane. Apply a second coats
taking care to ensure the membrane is fully saturated.

CEMENTITIOUS SURFACES AND BRICKS

Remove all dust, dirt or any foreign debris. Ensure that the surface is dry.

Apply one entire coat PCT TIE-COAT and leave for 24 hours to cure.

Apply one coat of PCT ELASTOGUARD followed by the
application of the membrane. Apply a second coats
taking care to ensure the membrane is fully saturated

CONCRETE ROOF SLABS
See addendum “  PPLIC  TION PROCEDURE”