PCT AGUAFLEX is a high build, high solids flexible crack
bridging texture waterproofing for interior and exterior
PCT® TIECOAT AND ADHESION ENHANCER semi- viscous liquid coating formulated specifically to enhance the
adhesion properties of PCT high solid and high build flexible waterproofing products when applied to poor or inferior cement or concrete surfaces.
The product is based on pure acrylic resins
PCT ELASTOGUARD is a high build; high solids crack bridging smooth waterproofing to be used with
membrane for interior and exterior use.
STEEL and GALVANISED SURFACES
Sand down with abrasive sandpaper and ensure that the surface is free from any rust, oxidisation. dust, dirt or any foreign debris.
Apply one alternatively two coats of PCT Aguaflex allowing for drying time between coats.
CEMENTITIOUS SURFACES AND BRICKS
Remove all dust, dirt or any foreign debris. Ensure that the surface is dry.
Apply one entire coat PCT TIE-COAT and leave for 24 hours to cure.
Apply one, alternatively two coats PCT AGUAFLEX allowing for drying time between coats